The Plush Velvet Office Chair Cover: Stretch Slipcover for Office Chairs, Fits Backs 19.7 to 25.6 in (50 to 65 cm), 12 Colors

Specifications

Fabric: Stretch polyester spandex velvet plush
Texture: Soft plush velvet
Fits: Office chairs with back height 19.7-25.6 in (50-65 cm) and seat width 17.7-23.6 in (45-60 cm)
Washing: Machine wash at 30°C (86°F) on a gentle cycle, then air dry
In the box: 1 chair cover
Good to know: One cover fits one chair
Seat depth: Up to 17-18 in (43.2-45.7 cm)
Colors: Black, dark gray, navy, beige, wine red, pink, gray, teal, red, light gray, tan, brown

A soft cover for the chair you sit in every day

The Plush Velvet Office Chair Cover is a stretch slipcover made from polyester spandex velvet plush. The fabric has a soft, raised pile that feels warm against the skin and hides the wear that builds up on a working chair. It pulls over the back and seat as a single piece, so the whole chair gets a fresh surface without any tools or fasteners.

This is a practical cover for an office chair, a computer chair or a home desk chair that still works well but no longer looks its best. The stretch fabric moves with the chair instead of pulling tight across the corners.

Sizes and fit

One cover fits one chair. Check these measurements before you order.

Measurement	Fits
Back height	19.7 to 25.6 in (50 to 65 cm)
Seat width	17.7 to 23.6 in (45 to 60 cm)
Seat depth	Up to 17 to 18 in (43.2 to 45.7 cm)

Measure the back from the top edge down to the seat, then measure across the widest part of the seat. If your chair falls inside these ranges, the cover should pull on with a smooth fit. Chairs with a very wide back, a built-in headrest or a large side lever may not sit as cleanly.

Colors

Pick the tone that suits your room. The cover comes in Black, Dark gray, Navy, Beige, Wine red, Pink, Gray, Teal, Red, Light gray, Tan and Brown. The solid color keeps the look simple, so the chair blends into a home office, a bedroom desk or a shared workspace. Dark gray, black and navy are the quiet choices. Teal, wine red and pink add a little color without a pattern.

How to put it on

Stretch the cover over the top of the chair back first.
Pull it down the back until the fabric sits flat.
Work the cover over the seat and tuck the edges in around the sides.
Smooth the fabric with your hands from the center outward.
Check the seat depth and adjust the front edge so it stays tucked.

Take the cover off before you adjust any levers or lift mechanism, then put it back once the chair is set. A second person makes the job easier on a tall back, but one person can manage it.

Care

Machine wash at 30°C (86°F) on a gentle cycle, then air dry. Do not wring the fabric. Turn the cover inside out before washing to protect the plush surface, and keep it away from heat. A light shake after drying brings the pile back up.

What is in the box

One chair cover. One cover fits one chair. No other items are included.

Questions

Will this cover fit my office chair?

It fits office chairs with a back height of 19.7 to 25.6 in (50 to 65 cm), a seat width of 17.7 to 23.6 in (45 to 60 cm) and a seat depth up to 17 to 18 in (43.2 to 45.7 cm). Measure your chair before ordering.

How many covers come in one order?

One cover. One cover fits one chair, so order two if you want to cover two chairs.

Can I wash it in a machine?

Yes. Machine wash at 30°C (86°F) on a gentle cycle, then air dry. Turn it inside out first and skip the dryer.

What colors can I choose from?

Black, Dark gray, Navy, Beige, Wine red, Pink, Gray, Teal, Red, Light gray, Tan and Brown.